|
Schuco Solar Water Heating
COMPLETE SYSTEM
SUPPLY-ONLY PRICES
ARE GIVEN BELOW.
SOLAR WATER HEATING Q & A 's?
Click... HERE
Schuco are one of Europe's largest manufacturers of solar thermal
and photovoltaic modules. If you have a project - a single house or
swimming pool, a large industrial unit or office block , a
residential home or school - we can design and install a Schuco
system that meets the highest technical standards of performance and
efficiency.
ON-ROOF SOLAR
SYSTEM
HOW
THE SYSTEM WORKS.
In the UK the ideal
is for the solar collector panels to be facing due south and at an
angle between 30 and 65 degrees from horizontal. If your roof ridge
runs north/south a system of two panels can be used.
A central heating
pump forces water through a coiled pipe in the solar panel where it
is heated by the sun. The heated water then flows down and through a
second (lower) coil in your hot water cylinder, referred to as a
solar cylinder or twin-coil cylinder. The water flowing around the
solar system is used to heat the water in the cylinder indirectly.
This means that no water in the Solar Heating system will come into
contact with water in your hot water cylinder. The heat is
transferred, not the water.
The slightly cooled
water is then returned back to the solar panel via the pump. The
controller box continuously compares the temperature in the panel
against that in the hot water cylinder. The pump is switched on when
the water temperature in the panel is hotter than the water in the
cylinder and switches off when the reverse conditions apply. As long
as the water in the hot water cylinder is at the required
temperature, your existing boiler will not switch on.
In
the UK, solar water heating systems for the home are designed to
work in conjunction with another water heating system, such as a
gas, oil or wood boiler. It is
possible to use solar to supply some low-grade heat for an
under-floor heating system but other heat input will be required.
This is certainly true if you have radiators or some combination of
radiators and underfloor heating.
An
average household SWH system will provide almost all your hot water over
the summer. Through the rest of the year it will pre-heat the water
which will then be brought up to temperature by the conventional hot
water system. Over the course of a whole year most solar panels
should provide around 60% of the total energy used by your hot
water system.
Premium Line Collectors are
each 2.7 sq. metres area
Compact Line Collectors are each 2.3 sq. metres area
COMPLETE SYSTEM
SUPPLY-ONLY PRICES WITHOUT CYLINDER
*Cylinder
and system sizing
can only be a rough guide. It depends on whether residents are
in or out most of the day, prefer a shower to a bath, use a washing
machine regularly and so on. A Residential Nursing Home has a very
different water use pattern compared to a 2-person household where
both people are out at work all day!
|
Household
size |
Cylinder Capacity
(litres) |
Premium Line Collectors
Complete solar water heating systems (excluding HW
cylinder).
2.7 sq. metres area
RAL Colour choices. |
Compact Line Collectors
Complete solar water heating systems
(excluding HW cylinder).
2.3 sq. metres area
Black frame only
|
|
1-2 persons |
200L |
ON-Roof System
1 panel = £
1400 + VAT
|
N/A |
|
IN-Roof
System 1 panel = £ 1475 + VAT |
|
3-5
persons |
250-300L |
ON-Roof System
2 panels = £ 2050 + VAT
|
ON-Roof System
2
panels = £ 1720 + VAT
|
|
IN-Roof System
2 panels = £ 2150 + VAT |
IN-Roof System
2 panels = £ 1940 + VAT |
|
5-6 persons |
350-400L |
ON-Roof System
3 panels = £ 2740 + VAT
|
ON-Roof System
3
panels = £ 2270 + VAT
|
|
IN-Roof System
3 panels = £ 2940 + VAT |
IN-Roof System
3 panels = £ 2500 + VAT |
SHIPPING COST dependent upon location.
Usually £45.00 inc VAT for one system delivered in England & Wales.
Solar heating - Premium Line
SchücoSol products
from the Premium-Line are available in three standard versions:
Aluminium silver, aluminium bronze and aluminium 7035.
|
|
- Dimensions: 2152 x 1252 x 93 mm
- Panel area: 2.69 m²
- Absorber area: 2.52 m²
- Weight: 55.0 kg
- Efficiency: 80.8 %
- Large solar panels with the same dimensions
- Modular construction supporting various
combinations
- Combination with large Schüco module of equal
size
- Wide range of colours
- The latest storage technology
- Approved structural calculations for all
installation types
- Installation types with the Premium Line
installation system: Roof-mounted, flat-roof, integrated roof,
complete roof, canopy and façade
- Certification:
DIN EN 12975-2 (ISFH), CE mark, "Blauer Engel" (Blue Angel)
|
Solar heating - Compact Line
SchücoSol K products from the Compact Line are available in
aluminium black as standard.
|
|
- Dimensions: 2039 x 1139 x 80 mm
- Panel area: 2.32 m²
- Absorber area: 2.15 m²
- Weight: kg
- Efficiency: 79.9 %
- Large solar panels with the same dimensions
- Plentiful hot water thanks to solar storage
tanks
- Perfect interaction of all components
- Approved structural calculations for all
installation types
- Installation types with the Compact Line
installation system: Roof-mounted, flat-roof and integrated roof
- Certification:
DIN EN 12975-2 (ISFH), CE mark, "Blauer Engel" (Blue Angel)
|
Perfectly tailored solar packages
Schüco supplies
complete solar packages for different applications. You have a
choice of two product ranges. Compact Line
offer uncompromising quality with attractively coloured collector
frames and three possible installation types.
Premium Line also offers higher system efficiency, better
quality fittings, a wider range of colours for the collector frames,
plus six installation types. The Schüco solar range ranges from a
Compact line 2-collector system for providing hot water with 300
litre storage cylinder to a Premium line 8 collector system with
additional auxiliary heating for 8 persons.
Advantages of the Compact packages at a
glance
- Collector frames and installation
profiles made from high-quality, black anodised aluminium
- Hail-proof clear glass for high
light permeability and security against glass breakage
- System function and yields can be
easily controlled from control unit by means of temperature
display and yield calculation
- Double enamelled hot water storage
cylinder for maximum corrosion resistance
- Optional demand-driven hot water
circulation minimises heat loss and pump use and reduces water
consumption
|
Compact M
Hot water for 2 to 4 persons
- 2 SchücoSol Compact collectors
- On-roof installation
system, optional in-roof and flat-roof
- WW 300-2 Solar storage cylinder
- Solar station 1.1
- SOLO control unit
- Expansion vessel 18L
|
Compact L
Hot water for
4 to 6 persons
- 3 SchücoSol Compact collectors
- On-roof installation system, optional in-roof and
flat-roof
- WW 400-2 Solar storage cylinder
- Solar station 1.1
- SOLO control unit
- Expansion vessel 18L
|
Compact
XL
Hot water for 6 to 8 persons
- 4 SchücoSol Compact collectors
- On-roof installation system, optional in-roof and
flat-roof
- WW 500-2 Solar storage cylinder
- Solar station 1.1
- SOLO control unit
- Expansion vessel 25L
|
|
Compact Plus
L
Hot water/auxiliary heating
for 4 to 6 persons
- 5 SchücoSol Compact collectors
- On-roof installation system, optional in-roof and
flat-roof
- S 750/150 solar storage cylinder, optional FW 750
hot water storage cylinder
- Solar station 1.1
- DUO control unit
- Expansion vessel 18L
|
Compact Plus
XL
Hot water/auxiliary heating
for 6 to 8 persons
- 5 SchücoSol Compact collectors
- On-roof installation system, optional in-roof and
flat-roof
- S 900/200 solar storage cylinder, optional FW 1000
hot water storage cylinder
- Solar station 1.1
- DUO control unit
- Expansion vessel 18L
|
|
|
Contact us or
call 0161 881
1383 to purchase. |
Schüco PREMIUM
LINE SOLAR PACKAGES
Advantages
of the Premium packages at a glance
- High-performance collectors with
2.69 m2 gross surface area and 2kW nominal heat capacity
- Collector frames and installation
profiles made from high-quality aluminium available in a wide
variety of colours
- Hail-proof clear glass for high
light permeability and security against glass breakage
- System function and yields can be
easily controlled from control unit by means of temperature
display and yield calculation
- Hot water storage cylinder with 100
mm thermal insulation
- Demand-driven hot water circulation
minimises heat loss, pump use, and reduces water consumption
|
Premium M
Hot water for 2 to 5 persons
- 2 SchücoSol collectors
- On-roof installation system, Optional> in-roof,
flat-roof, canopy, and façade
- STE 350 solar storage cylinder
- Integrated solar station
- SOLO control unit
- Expansion vessel 18L
|
Premium
L
Hot water for 5 to 6 persons
- 3 SchücoSol collectors
- On-roof installation system, optional: in-roof,
flat-roof, canopy, and façade
- STE 350 solar storage cylinder
- Integrated solar station
- SOLO control unit
- Expansion vessel 18L
|
Premium Plus
L
Hot water/auxiliary heating for 2 to 8
persons
- 4 SchücoSol collectors, optional double glazed
collectors for increased solar yield
- On-roof installation system, optional: in-roof,
flat-roof, canopy, and façade
- ST 1000 solar storage cylinder
- Integrated solar station
- DUO control unit
- Expansion vessel 25L
|
|
Premium Plus
XL
Hot water/auxiliary heating for 2 to 8
persons
- 4 SchücoSol collectors Optional double glazed collectors
for increased solar yield
- On-roof installation system, optional: in-roof,
flat-roof, canopy, and façade
- ST 1000 solar storage cylinder
- Integrated solar station
- DUO control unit
- Expansion vessel 25L
|
Premium Plus Integral
Hot water/auxiliary heating for 2 to 5
persons
- 4 SchücoSol collectors, optional double glazed
collectors for increased solar yield
- On-roof installation system, optional: in-roof,
flat-roof, canopy, and façade
- PP 500 Integral solar storage cylinder
- Integrated solar station
- DUO control unit
- Expansion vessel 25L
|
|
|
Contact us
or
call 0161 881
1383 to purchase. |
|
