Rutland 503
Marine Windcharger (12 volt)
The Rutland 503 is ideal for trickle charging batteries on board vessels less that 10m in length
and with battery banks of up to 100Ah.
It can also be connected to touring caravans for battery-charging.
....12 Volt only....
|
"Safety
turbine" is a single injection moulding of 6 aerofoil blades
protected by an outer ring.
Trickle charges in windspeeds as low as 5 Knots.
Produces up to 80watts.
Output nominally 1.2A @ 12V at 15 Knots.
Stainless
steel fasteners and marine grade materials.
Turbine diameter of 510mm.
Compact turning radius of just 225mm, great for when space is at
a premium.
Weight 3.5 Kg.
No radiated interference - complies fully with BS EN5008-1 1992.
HRS503 or HRDX regulator recommended.
Price : £285.00 
|
Balance of System Components
* HRS503 or HRDX regulator.
HRS503 regulator.
Price : £ 42.00
Use with Rutland 503 Windcharger & up to 100W of solar. Prevent battery overcharge.
Fit between the Windcharger / solar and battery.
All models are diode protected to allow charging from other sources to the same battery.
LED indicators showing battery and charging state.
HRDX regulator. Price : £ 149.00
Use with Rutland
503 Windcharger.
Incorporates regulator and selectable LCD display.
Charge splitter for 2 battery banks.
Solar panel input up to 100W (Schottky diode
required)
Prevent battery overcharge.
Fit between the Windcharger / solar and battery.
All models are diode protected to allow charging from other sources to the same battery.
* Marine Mounting Kit supplied in 2 sections of stainless steel tube
plus deck fixing and fasteners.
Other system components
Batteries - We recommend deep cycle lead acid batteries, sealed or non-sealed of a minimum capacity of 50AH @ 12V
Cable - Cable thickness depends on the overall length used between the wind generator, regulator and battery. For distances
up to 20m a cable thickness of 2.5mm is recommended. The regulator should always be sited within 1.5m of the battery to minimise voltage losses and ensure accuracy of battery regulation.
Mounting pole for land based systems - the 503 can be installed on land using
a 1m section of tube. This can be adapted to fit onto a 6m length of 61mm diameter tube available through a local tube stockholder.
Mounting pole for on-board systems - you can make your own mounting pole using a 31.7mm (1.25") internal diameter tube, the maximum external diameter should be 38mm (1.5").
|
