Power Saver, Energy Saver

Residential Power Saver Ł42.00

+ Ł 4.00 carriage.

or phone with your card details.

EPS-188

Designed for up to a 4 Bedroom home

Commercial Power Saver Ł60.00

+ Ł 4.00 carriage.

or phone with your card details.

EPS-388

For offices, schools, restaurants, hotels and large shops

HOW DOES IT WORK?

The EPS Power Saver uses a combination of filtration and correction techniques to improve the efficiency of various appliances and circuits. In addition, the intelligent technology optimises the voltage and current demands thus reducing the active power / KWH demands and achieves around 10% to 20% savings on your electricity bill.

It also acts as a voltage stabilizer by storing energy for up to 10 seconds and therefore supplies load with proper voltage during momentary power surges.

Installation

Installation of the Power Saver is very easy. Just plug the unit into any 13 Amp socket on your premises and that’s all you need to do.

For a safe and reliable operation, EPS recommends that the unit should be plugged into a wall socket and not an extension lead.

The device can store energy for up to 10 seconds after it is switched off, therefore wait for at least 10 seconds between switching off the mains and un-plugging the device.

SIZE & WEIGHT

Weight:500 gm Size:126 X 138 X 80 mm (5 x 5.5 x 3 inches)

The Guarantee

The EPS Power Saver unit offers a minimum of 10% reduction in your electricity bill from day 1, therefore saving you money. The amount of reduction depends upon the type of load and the usage pattern. On average our customers have genuinely seen the following savings.

10% - 15% savings in residential premises.

15% - 20% savings in business and commercial premises.

The EPS Power saver unit can be returned within 2 months of purchase if the product does not deliver the savings promised. A proof of purchase is required.

The money back guarantee is invalid if:

The returned Power Saver has visible damage caused by misuse, neglect or tampering with the unit.

The serial number has been removed from the Power Saver.

Frequently Asked Questions

Q1. Will the Power Saver unit definitely reduce my electricity bill

Ans: EPS offer a unique money back guarantee, which proves to our customers how confident we are about our product.

The Power Saver unit will definitely reduce your electricity bill. Based on customer feedback and extensive tests, savings between 10 & 20% have been recorded under normal conditions. The percentage savings will depend upon the type of load and the consumption. In some cases, savings above 20% have been recorded, especially in shops and offices.

Q2: What is the EPS Power Saver?

Ans: The EPS Power Saver unit is a device, which will reduce your electricity bill and save you money. The Power Saver uses state of the art electrical technology to actively monitor and improve the power factor of your household appliances. In addition, the intelligent technology optimises the voltage and current demands thus reducing the total current drawn from the mains AC source. It also acts as a voltage stabilizer and therefore supplies load with proper voltage during momentary power surges.

Q3: Would the electricity companies object to the use of the Power Saver unit?

Ans: No. The electricity companies encourage the manufacturers to build products, which are of a ‘high energy rating’. For example, when buying a new washing machine, there is a choice between an appliance of a ‘high energy rating’, which consumes less electricity and costs more, or an appliance of a ‘low energy rating’, which consumes more electricity but is cheaper to buy. The Power Saver unit operates on a similar principal and converts the whole electrical circuit to a ‘high energy rating’ circuit, therefore saving you money on your electricity bills.

Q4: How do I install the Power Saver unit?

Ans: The installation of the Power Saver is very easy. Just plug the unit into any 13 Amp socket on your premises and that’s all you need to do. EPS recommends the following for a safe and reliable operation. Plug this device into a wall socket, not an extension lead.

Q5: Does the Power Saver require any maintenance?

Ans: No. Simply plug the Power Saver unit on your premises and start saving money.

Q6: Do I need to make any changes to the electrical wiring?

Ans: No. The Power Saver is designed as a Plug & Play device. Simply plug the unit into a13 Amp socket on your premises. EPS recommends that the power saver should be plugged into a wall socket, not an extension lead.

Q7: Do I get any warranty with the Power Saver unit?

Ans: The Power Saver unit comes with a 24-month 'new for old' warranty, covering any manufacturing or material defects.

Q8: Which Power Saver model is suitable for my use?

The EPS 188 model is suitable for residential use and is specially designed for small small shops, 3- 5 bedroom homes or any other premises where the monthly electricity consumption is between 300 KWH - 1000 KWH.
The EPS 388 model is suitable for large homes, offices, shops, restaurants or any other premises where the monthly electricity consumption is between 1000 KWH - 2500 KWH.

Q9: Is the Power Saver unit suitable for use in a 3 phase systems?

Ans: Yes. The EPS 388 model is suitable for use in a 3-phase system. However, for a 3-phase system, only our qualified electricians can carry out the installation of the EPS 388 Power Saver unit. Please contact our customer services team, who will be happy to assist you with your requirements. Please note that EPS 388 is not suitable for heavy-duty industrial load or monthly consumption exceeding 6000 KWH.

Q10: How long will it take to recover the cost of buying a Power Saver unit?

Ans: Based on customer feedback and field-testing, the original investment on the Power Saver can easily be recovered in 4 - 6 months, therefore allowing you to enjoy additional savings for years to come.

Q11: Is the Power Saver unit safe?

Ans: Yes. The Power saver unit is built to the highest possible manufacturing standards.

Q12: Do I leave the Power Saver Unit ‘switched-on’ continuously?

Ans: Yes. The Power Saver unit should be left 'Switched ON' continuously to achieve the maximum savings. EPS recommend that the unit should be switched off during long periods of inactivity, for example, when going abroad on holiday, or if the premises are closed for long periods of time.

Please note that the Power Saver unit can store energy for up to 10 seconds after it is switched off, therefore wait for at least 10 seconds between switching off the mains and un-plugging or relocating the device.

Q13: Can the Power Saver unit be wall mounted?

Ans: Yes. The user manual has detailed instructions for the wall mounting preparation.

Q14: Is the Power Saver environmentally friendly?

Ans:

Yes. Power Saver helps improve the environment by minimising the amount of reactive power which otherwise is wasted in distribution networks, cables and your appliances in the form of heat.

			Energy & Environment Ltd

			Tel : 0161 881 1383