|
Outback Power
-Inverter/Chargers
The Outback Power pure sinewave
inverter-charger incorporates a DC to AC inverter, battery charger and
AC transfer switch all housed in a die-cast aluminiun chassis.
''Smart'' multistage battery charging means less generator 'on' time
and extends the life of your batteries. Outback's modular design
allows small systems the ability to increase the power output as the
demand grows from 2-30 Kw - even in 3-phase configurations. The
built-in memory retains all the information even when the inverter
isn't on. Lightweight and highly efficient..
The FX series uses a sealed chassis that
can operate in the harshest environment al conditions such as high
humidity and corrosive salt air. The VFX series uses a vented chassis
with 'bug proof' screened openings that allow higher AC output power.
Both series allow full network communications.
 OUTBACK
FX (SEALED)
OUTBACK VFX (VENTED)
| |
Sealed Models |
|
Vented Models |
| |
FX2012ET
|
FX2024ET
|
FX2348ET
|
|
VFX2612E
|
VFX3024E
|
VFX3048E
|
| Nominal
DC Input Voltage |
12VDC
|
24VDC
|
48VDC
|
|
12VDC
|
24VDC
|
48VDC
|
|
Continuous Power Rating 25° C |
2000VA
|
2000VA
|
2300VA
|
|
2600VA
|
3000VA
|
3000VA
|
| Nominal
AC Input Voltage/Frequency |
230VAC / 50Hz
|
230VAC / 50Hz
|
230VAC / 50Hz
|
|
230VAC / 50Hz
|
230VAC / 50Hz
|
230VAC / 50Hz
|
|
Continuous AC RMS Output @ 25° C |
8.7 amps AC
|
8.7 amps AC
|
10.0 amps AC
|
|
11.3 amps AC
|
13.0 amps AC
|
13.0 amps AC |
| Idle
Power
|
Full
|
~ 20 Watts
|
~ 20 Watts
|
~ 20 Watts
|
|
~ 20 Watts
|
~ 20 Watts
|
~ 20 Watts
|
|
Search
|
~ 6 Watts
|
~ 6 Watts
|
~ 6 Watts
|
|
~ 6 Watts
|
~ 6 Watts
|
~ 6 Watts
|
|
Typical Efficiency |
90%
|
92%
|
93%
|
|
90%
|
92%
|
93%
|
| Total
Harmonic Distortion
|
Typical
|
2%
|
2%
|
2%
|
|
2%
|
2%
|
2%
|
|
Maximum
|
5%
|
5%
|
5%
|
|
5%
|
5%
|
5%
|
|
Output Voltage Regulation |
+/- 2%
|
+/- 2%
|
+/- 2%
|
|
+/- 2%
|
+/- 2%
|
+/- 2%
|
| Surge
Power Peak (1mSec) |
28 amps AC
|
35 amps AC
|
35 amps AC
|
|
28 amps
|
35 amps AC
|
35 amps AC
|
|
Surge Power RMS (100mSec) |
20 amps AC
|
25 amps AC
|
25 amps AC
|
|
20 amps AC
|
25 amps AC
|
25 amps AC
|
|
Overload (from 25° C start)
|
Surge
|
4600VA
|
5750VA
|
5750VA
|
|
4600VA
|
5750VA
|
5750VA
|
|
5 sec
|
4000VA
|
4800VA
|
4800VA
|
|
4000VA
|
4800VA
|
4800VA
|
|
30 min
|
2500VA
|
3100VA
|
3100VA
|
|
3100VA
|
3300VA
|
3300VA
|
|
AC Input Current Maximum
|
30 amps AC
|
30 amps AC
|
30 amps AC
|
|
30 amps AC
|
30 amps AC
|
30 amps AC
|
| AC
Input Voltage Range (MATE Adjustable) |
160 to 300 VAC
|
160 to 300 VAC
|
160 to 300 VAC
|
|
160 to 300 VAC
|
160 to 300 VAC
|
160 to 300 VAC
|
|
AC Input Frequency Range
|
44 to 56 Hz
|
44 to 56 Hz
|
44 to 56 Hz
|
|
44 to 56 Hz
|
44 to 56 Hz
|
44 to 56 Hz
|
| DC
Input Range |
10.5 to 17.5 VDC
|
21.0 to 34.0 VDC
|
42.0 to 68.0 VDC
|
|
10.5 to 17.5 VDC
|
21.0 to 34.0 VDC
|
42.0 to 68.0 VDC
|
|
Continuous Battery Charger Output
|
100 amps DC
|
55 amps DC
|
35 amps DC
|
|
120 amps DC
|
85 amps DC
|
42 amps DC
|
|
Recommended DC Breaker |
OBDC-250
|
OBDC-175
|
OBDC-100
|
|
OBDC-250
|
OBDC-250
|
OBDC-175
|
|
Warranty |
Standard 2 year / Optional 5 year
|
|
Standard 2 year / Optional 5 year
|
| Weight |
Unit
|
56 lbs (25 kg)
|
|
54 lbs (25 kg)
|
|
Shipping
|
67 lbs (30 kg)
|
|
62.2 lbs (28 kg)
|
|
Dimensions |
Unit
|
13 x 8.25 x 16.25” (33 x 21 x 41
cm)
|
|
12 x 8.25 x 16.25” (30 x 21 x 41
cm)
|
|
Shipping
|
21.75 x 13 x 22” (55 x 33 x 56
cm)
|
|
21.75 x 13 x 22" (55 x 33 x 56
cm)
|
Contact us or
call 0161 881 1383 to
purchase.
DELIVERY only £30.00 IN
THE UK for single units.
PRICES : IN £ STERLING
Sealed
Models
FX2012ET 12Volt
FX2024ET 24Volt
FX2348ET 48Volt
Email
or CALL TO CHECK PRICES AND TO ORDER
Vented
Models
VFX2612E
12Volt
VFX3024E 24Volt
VFX3048E 48Volt
Email
or
CALL TO CHECK PRICES AND TO ORDER
Accessories
MATE :
With a single mate you can remotely control and monitor multiple
inverter chargers< MX60s and any future additions to the system. A
built-in clock and calendar allow timer based programming of inverter
and charger operation. The MATE can be linked to a PC for data logging
and graphical display of the system's operation.
HUB : The
HUB system communications managers are the backbone of a networked
Outback power conversion system. The Outback HUB communicates
stacking, load share and power save off/on signals. Interconnection
cabling is standard Ethernet CAT5 with RJ45 modular jacks.
FLEXNET DC :
Is the ultimate in DC monitoring devices. It makes usable data
available from your system viewable on an Outback MATE communications
device, providing answers on system health, performance and
efficiency.
FLEXWARE :
the Flexware 250 offers a solutions for AC and Dc disconnects in
single inverter charger installations when space and budget are
primary concerns. The Flexware 500 supports up to two inverter
chargers and two charge controllers in a package when split-phase
and/or higher power output is needed. Flexware 1000 supports up to
four inverter chargers and four charge controllers.
Both Flexware 500 and Flexware 1000 provide locations for auto-transformes,
multiple DC shunts and other items required in higher power
applications.
Contact us or
call 0161 881 1383 to
purchase.
|
