|
The Merlin wind turbine is a
downwind turbine that produces native 120VAC 3 phase output and is
well suited for grid-tie applications, but via a controller may be
equally well used for low voltage DC applications.
It will be available with a complete range
of recommended balance of system components including towers,
inverter, charge controller and dump loads. The towers will be
either guyed or free-standing at either 7.5 or 12m tall and will
be provided.
Merlin – a summary
·
3.5m
diameter
·
1,150w
output at 8 m/s
·
2,500w
output at 12 m/s
·
Furling
system and parking brake
·
240VAC 3
phase native output voltage.
The Merlin comes as a
complete package (everything is included that is required to run
the turbine). Part of the package is a Control Unit that contains
a) a rectifier, b) run/stop switch, c) over voltage protection, d)
an Isolator e) Ammeter
A
Windyboy WB-3000 grid tie
inverter is included in the package price shown below.
Please
note that the WB-3000 Inverters are optimized for each Samrey turbine before
they are sent out.
This
involves:
a)
Stator of the Turbine being optimized
for the Inverter
b)
Software on the Inverter being
pre-programmed to match the turbine
|
