DEGERtraker 3000NT/ 5000NT / 7000NT
Dual-axis,
active tracking system for free-standing applications, on buildings
and for fitting on different mast heights.
----------------------------
DEGER TOPtraker® 8.5
Single-axis,
active tracking system for flat roofs, for free-standing
applications.
Single-axis active tracking system for 20-30 % higher energy
output
DEGERconecter
The
DEGERconecter constantly adjusts the solar installation to the
brightest spot in the sky, ensuring maximum energy yield.
Consequently, our tracking systems increase both yield and
efficiency, making them more economical than their traditional - and
more expensive - counterparts. Two sensor cells in the DEGERconecter
supply reference values which are evaluated by the logic device, and
which provide the basis for the adjustments of the module surface in
the course of the day. A third sensor cell is attached to the back
of the DEGERconecter to reset the installation in the morning.
The DEGERconecter control
recognizes the brightest spot in the sky and adjusts the module
surface to that position. The mechanics allow the accurate
adjustment of the module surface to face the sun all year round.
This technology also works in
cloudy, rainy or foggy conditions. If, for instance, a day starts
off sunny with clouds moving in from the west in the afternoon, the
module surface will then move back slightly towards the east. On a
completely overcast day, the module surface is adjusted to a
horizontal position, or to face the point of the strongest
irradiation, making the most out of adverse weather conditions.
For
Frequently Asked Questions .......Click
Here
DOWNLOADS
are shown in BLUE below.
Click
on links for PDF information.
Power
Generation
TOPtraker® 8.5
DEGERtraker 3000NT
DEGERtraker 3000HD
The 3000NT (New
Technology) and 3000HD (Heavy Duty) models are designed for
different requirements.
The structural
change differentiates the systems in terms of robustness, which
results in the heavy duty model withstanding higher wind loads.
DEGERtraker 5000NT
DEGERtraker 5000HD
DEGERtraker 7000NT
An HD (Heavy Duty)
version of the best selling 5000NT (New Technology) is also
available.
The HD model is
designed for coastal regions and strong wind zones.
NEW :
The 6000NT is a new system
based on the HD (Heavy Duty) structure of the 5000HD. With a module
surface of 53m², the 6000NT can withstand the maximum wind load of
130 km/h.
Download the 6000NT data sheet
(English version)
click here
NEW :
The 9000NT is the
biggest system within the DEGERenergie product portfolio with 15%
additional module surface compared to the 7000NT which is the
biggest system so far.
Download the 9000NT data sheet (English version)
click here
Building
Integration
TOPtraker® 8.5
The flexible design of
the TOPtraker 8.5 single-axis system makes it particularly suited to
markets in which strict height regulations apply. 20 degree
and 30 degree tilt options.
TOPtraker 25HD
The 25HD TOPtraker
can also be used for open areas in strong wind zones.
DEGERtraker 3000HD
DEGERtraker 5000HD
The HD model is
designed for coastal regions and strong wind zones.
