|
Black 300W SMALL WIND TURBINE
Unlike current wind
turbines the "Black 300" does not have a stop moment mechanism which
enables the unit to produce a charge in winds as low as 1.8 m/s.
The
rotor diameter is only 1.22 meters and the turbine is equipped with a
3 phase AC generator. Ideal for charging batteries
The 12V and 24V
come with a charge
controller which has a connection point for an additional 100Wp solar
panel (if a solar + wind charging option is required in your
application).
1.22m
rotor diameter.
12V, 24V or 48V DC. chargers available.
NOTE :
the 48V version can be used for grid connection when used with a
suitable controller and inverter.
The "Black 300" is
manufactured to ISO9001standards and has a CE kitemark
| Rotor blades |
3-Bladed |
| Rotor material |
GRP |
| Rotor diameter (assembled) |
1,22m |
| Generator |
Permanent |
| Drive |
Direct Drive |
| System voltage |
12V DC/24V DC/48V DC |
| Rated power at 9 m / s |
300 Watt |
| Cut in Wind speed |
1,8m/s |
| Generator weight |
16Kg |
| Packing |
70 cm x 40 cm x 21 cm (18Kg) |
| Guarantee |
24 Months |
Included in the package for 12V and 24V turbines:
Turbine with blades
and all assembly accessories
Charge controller
with connection for additional 100 Wp solar power
Included in the package for 48V turbines:
Turbine with blades
and all assembly accessories
Turbine Mast is
NOT Included in any package.
Please contact our
sales department if you require any further information.
Wind Speed (m/sec) vs Output
(Watts) is shown below
PRICES £
12V and 24V Battery charging
inc regulator = £
585.00 inc VAT
48V Grid tie
without inverter
= £ 585.00 inc VAT
-----------------------------------------------------------------
Grid tie inverter used with the 48V is
the Windmaster 500 with G83 certificate.
Windmaster 500
inverter is £695 inc VAT
The
Windmaster 500 offers a simple solution when connecting a small
turbine to your household mains supply. With it's light weigh and
compact size, the Windmaster 500 can be installed inside existing
meter cupboards, or in outbuildings, but is not suitable for use
outdoors. Connection to the input of the inverter is provided by 2
dedicated DC power plugs, supplied. The output should be connected in
accordance with the electrical requirements for the country of
installation.
This
inverter comes complete with DC input plugs, PC-Link connection and
Monitoring/Logging software. No charge controller is required
when using these inverters, since they can handle a much higher input
voltage than the turbine can produce, even in power-cut situations.
In "Hybrid"
systems (those involving both wind turbines and a small sized solar PV
array) use the standard Soladin 600 inverter for the PV side, keeping
the installation simple and very neat.
---------------------------------------------------------------------------------
SHIPPING to mainland England & Wales is £25.00
inc VAT
Tel : 0161 881 1383
Contact
us
for more information.
No obligation,
just good service
RELATED
PRODUCTS
Solar / wind street
lighting using the Black 300
More
Information coming soon
Tel : 0161 881 1383
Contact
us
for more information.
|
